This set was designed in principle to give utility to recycled PET filament from bottles and at the same time, organize screws, nuts, washers and accessories in the workshop.
Was inspired in a mix of "Stackable boxes with labels (some labels included)" by SiriusFog (https://www.thingiverse.com/thing:4407580) and "Full set of stackable boxes (three heights, tops and trays)" by stenokit (https://www.thingiverse.com/thing:4741908).
Some used labels and a base STL were included, to which you can simply add the text that you need to customize.
All suggestions or changes required based on each need are welcome. Just contact me and I can send or upload the files.
DIVISIONS
Single: No divisions
2L: 2 full-length divisions
2W: 2 full-width divisions
3W: 3 full-width divisions
2L-3W: 2 divisions in length by 3 in width
DEPTH:
MINI: 16mm
SMALL: 24mm
MID: 32mm
BIG: 50mm
BIG MAX: 66mm
| Box_Big.STL | 44.1KB | |
| Box_Big_2L.STL | 46.1KB | |
| Box_Big_2L_3W.STL | 53.9KB | |
| Box_Big_2W.STL | 46.1KB | |
| Box_Big_3W.STL | 48.0KB | |
| Box_Big_Max.STL | 43.5KB | |
| Box_Big_Max_2L.STL | 45.5KB | |
| Box_Big_Max_2L_3W.STL | 53.3KB | |
| Box_Big_Max_2W.STL | 45.5KB | |
| Box_Big_Max_3W.STL | 47.4KB | |
| Box_Mid.STL | 44.0KB | |
| Box_Mid_2L.STL | 46.0KB | |
| Box_Mid_2L_3W.STL | 53.8KB | |
| Box_Mid_2W.STL | 46.0KB | |
| Box_Mid_3W.STL | 47.9KB | |
| Box_Mini.STL | 35.6KB | |
| Box_Mini_2L.STL | 38.2KB | |
| Box_Mini_2L_3W.STL | 46.8KB | |
| Box_Mini_2W.STL | 38.0KB | |
| Box_Mini_3W.STL | 39.5KB | |
| Box_Small.STL | 34.8KB | |
| Box_Small_2L.STL | 46.0KB | |
| Box_Small_2L_3W.STL | 53.8KB | |
| Box_Small_2W.STL | 46.0KB | |
| Box_Small_3W.STL | 47.9KB | |
| Box_Top.STL | 171.3KB | |
| Label_Base.STL | 1.1KB | |
| Label_Mini_Base.STL | 1.1KB | |
| Label_Mini_M3x25.STL | 59.0KB |
