Stackable Box System For Screws And Nuts 3D Printer Model
The file 'Stackable Box System For Screws And Nuts 3D Printer Model' is (stl) file type, size is 4.0MB.
The file 'Stackable Box System For Screws And Nuts 3D Printer Model' is (stl) file type, size is 4.0MB.
Remix -> http://www.thingiverse.com/thing:1090191
Intend to organize screws. Take 1-2-3 through the front or dump out a Hand full on the back of the box...
Box on pics is filled with 500 Screws M3x12mm.
i have to replace the wall in the middle for nuts, spacers and longer/bigger screws. will upload some more boxes wich fit in the System soon...
the stand has holes for wallmount, but this Version is not stiff enough to hold more than 1-2 boxes if filled with heavy stuff like screws. update for wallmount with stiffer design also comming soon...
UPDATE:
i´ve added small boxes with 2 and 3mm Slots V2. (removed 2-7mm boxes from yesterday cuz they didn´t fit exactly at the back and need Support for the slot)
This versions are good for M3 Spacers and M3 Nuts.
Added: V2 of 4, 5, 6 and 7mm Sloted Boxes and the more stable wallmount Version of the stand. (not printed yet but slices nice in slic3r)
Added: Box Big Version
Added: Stand_Wallmount_Duo.stl <- Stand for 2 boxes, rigid, wallmountable and with holes (2xM3) to connect more Units in a row.
Added: Light Version of the dual stand, use it if you dont need wallmount and reduce print time/material
Added: ‘Box_very_small.stl’ and ‘Box_very_small_nose.stl’
Update:
======
Added: "Box1_with_label_insert.stl" and "Box_BIG_with_label_insert.stl"
Made for 20x40mm Paper Labels
| Box1.stl | 701.4KB | |
| Box1_with_label_insert.stl | 634.8KB | |
| Box_BIG.stl | 688.8KB | |
| Box_BIG_with_label_insert.stl | 726.9KB | |
| Box_small_2mm_slot_V2.stl | 501.5KB | |
| Box_small_3mm_slot_V2.stl | 486.8KB | |
| Box_small_4mm_slot_V2.stl | 488.9KB | |
| Box_small_5mm_slot_V2.stl | 488.9KB | |
| Box_small_6mm_slot_V2.stl | 488.9KB | |
| Box_small_7mm_slot_V2.stl | 488.8KB | |
| Box_very_small.stl | 379.4KB | |
| Box_very_small_nose.stl | 510.1KB | |
| Stand.stl | 709.2KB | |
| Stand_Light_Duo.stl | 1.1MB | |
| Stand_Wallmount.stl | 774.7KB | |
| Stand_Wallmount_Duo.stl | 1.1MB |
