Stackable bins based on:
You may also be interested in my stackable shelves, which is basically this without the front.
NOTE: I updated all bins and shelves on 2023-10-31 (happy Halloween) to make any bin and shelf with the same width and depth compatible with each other for stacking. This does mean that all models printed before this change are incompatible with the new models.
I started from scratch so I could make it parametric in Fusion 360. Also made some changes:
I included various common sizes as well as the Fusion 360 file if you want to choose your own—the f3d file is fully parametric.
| bin_100x100x100mm.stl | 29.7KB | |
| bin_100x100x50mm.stl | 29.7KB | |
| bin_100x100x75mm.stl | 29.7KB | |
| bin_110x220x110mm.stl | 28.9KB | |
| bin_140x140x105mm.stl | 29.6KB | |
| bin_140x140x140mm.stl | 29.6KB | |
| bin_140x140x70mm.stl | 29.6KB | |
| bin_180x180x135mm.stl | 28.9KB | |
| bin_180x180x180mm.stl | 28.9KB | |
| bin_180x180x90mm.stl | 28.9KB | |
| bin_220x220x110mm.stl | 29.7KB | |
| bin_220x220x165mm.stl | 29.7KB | |
| bin_220x220x220mm.stl | 29.7KB | |
| bin_30x60x30mm.stl | 28.9KB | |
| bin_50x100x50mm.stl | 27.8KB | |
| bin_60x60x30mm.stl | 29.7KB | |
| bin_60x60x45mm.stl | 29.7KB | |
| bin_60x60x60mm.stl | 29.7KB | |
| bin_70x140x70mm.stl | 27.8KB | |
| bin_90x180x90mm.stl | 27.8KB | |
| divider_100x100mm.stl | 1.3KB | |
| divider_100x50mm.stl | 1.3KB | |
| divider_100x75mm.stl | 1.3KB | |
| divider_140x105mm.stl | 1.3KB | |
| divider_140x140mm.stl | 1.3KB | |
| divider_140x70mm.stl | 1.3KB | |
| divider_180x135mm.stl | 1.3KB | |
| divider_180x180mm.stl | 1.3KB | |
| divider_180x90mm.stl | 1.3KB | |
| divider_220x110mm.stl | 1.3KB | |
| divider_220x165mm.stl | 1.3KB | |
| divider_220x220mm.stl | 1.3KB | |
| divider_60x30mm.stl | 1.3KB | |
| divider_60x45mm.stl | 1.3KB | |
| divider_60x60mm.stl | 1.3KB | |
| stackable_bin.f3d | 1.1MB |
