Stabbing Keycaps (Pointy, Spiky) – Perfect Prank For Coworkers And Family 3D Printer Model
The file 'Stabbing Keycaps (Pointy, Spiky) – Perfect Prank For Coworkers And Family 3D Printer Model' is (stl) file type, size is 185.8KB.
The file 'Stabbing Keycaps (Pointy, Spiky) – Perfect Prank For Coworkers And Family 3D Printer Model' is (stl) file type, size is 185.8KB.
Custom Stabby / Pointy Keycaps for Cherry Mx Profile (type of mechanical keyboards). A perfect gift or a prank for your coworker or family member.
Imagine their face when they see their entire keyboard covered with spiky keycaps.
Includes 2 keycap designs:
Printing settings:
Infill: 20% minimum
Speed: 40 mm/s minimum
Supports (Not really needed) - They can be added just in case but have little to no effect on print quality for this project).
Skirts/Rafts/Brims are not needed. If your bed levelling is not great you can use a raft to fix it a bit. If adhesion is not great use a brim.
*Printing with resin is also an option.
*Be careful on first layer. If your nozzle is too close to bed, your first layer will get smooshed and you wont be able to place the keycap on the keyboad.
Let us know if you have problems and we will try to respond as soon as possible. If you need any other custom keycaps let us know. To use this commercially please contact us privately on our email: [email protected]
If you want us to print this for you and ship it to your location please send us a message on our Etsy: https://www.etsy.com/shop/MihovecDesign
| Stabby_Flat_Keycap_Profile_outwards_Mihovec_Design_.stl | 420.2KB | |
| Stabby_Round_Keycap_Profile_outwards_Mihovec_Design.stl | 139.4KB |
