SSD Stackable Tray With Lid (Front Ports) 3D Printer Model
The file 'SSD Stackable Tray With Lid (Front Ports) 3D Printer Model' is (stl) file type, size is 274.0KB.
The file 'SSD Stackable Tray With Lid (Front Ports) 3D Printer Model' is (stl) file type, size is 274.0KB.
This is a stackable tray to hold SSD hard drives. The base of the tray has four holes for screwing the SSD into the tray (v1) or it can be used as a base with the holes used to screw down into a permanent position.
Version 2 (v2) has small studs in place of the screw holes. These allow you to hold an SSD is place quite firmly without needing to use screws. In my testing I can hold the tray upside down without the SSD falling out, though it definitely holds when vertical.
A matching lid is also included as well as a lid with cutouts if desired.
A full-size HDD version which also supports SSDs and includes a separate lid and base and allows for mounting 120mm cooling fans can be found here ...
https://www.thingiverse.com/thing:6114929 (ports in)
and here ...
https://www.thingiverse.com/thing:6133437 (ports out)
An alternative version with the SATA ports facing "in" can be found here ... https://www.thingiverse.com/thing:6114918
I printed mine with the following settings...
... Material: PLA
... Layer height: 0.2mm
... walls: 2
... Infill: 10%
... Rafts: None
... Supports: None
| Stackable_SSD_Tray_Front_ports_-_Lid.stl | 31.1KB | |
| Stackable_SSD_Tray_Front_ports_-_Lid_with_cutout.stl | 95.8KB | |
| Stackable_SSD_Tray_Front_ports_-_Main_v1.stl | 334.7KB | |
| Stackable_SSD_Tray_Front_ports_-_Main_v2.stl | 575.1KB |
