SR5 1/10 Scale Body 3D Printer Model
The file 'SR5 1/10 Scale Body 3D Printer Model' is (stl) file type, size is 633.5KB.
The file 'SR5 1/10 Scale Body 3D Printer Model' is (stl) file type, size is 633.5KB.
This is a remix of Bernie222's SR5. As well as the rear fender from https://www.thingiverse.com/thing:5553357
It has been stretched, widened, and the cab height lowered to fit my Element Enduro with a Rock Pirates RC Interceptor chassis that has 8 inch sliders with a 313mm wheelbase, and 4.19in tires. Rear fender was nipped in the back, and the flares narrowed.
I used Cura to slice the files, using tree supports, and a brim bed adhesion. Total print time was approximately 84 hours.
Fenders, and Door are the Drivers side. Mirror the files in order to print the Passenger side.
| Door_Panel.stl | 432.3KB | |
| Front_Fender.stl | 99.3KB | |
| Grill.stl | 306.1KB | |
| Grill_Mesh.stl | 53.4KB | |
| Headlight_Lens.stl | 8.0KB | |
| Hood.stl | 159.9KB | |
| Rear_Fender.stl | 120.7KB | |
| Rear_Wall.stl | 227.1KB | |
| Rear_Window.stl | 54.4KB | |
| Roof.stl | 82.4KB | |
| Turn_Signal_Lens.stl | 8.4KB |
