Squirrel Feeding House 3D Printer Model
The file 'Squirrel Feeding House 3D Printer Model' is (stl,f3d,step) file type, size is 1.2MB.
The file 'Squirrel Feeding House 3D Printer Model' is (stl,f3d,step) file type, size is 1.2MB.
squirrel feeding house.
printed in brown PETG.
size of the house 183x125x175mm
size of the large seat 250x115mm
size of the small seat 160x115mm
the following parts are still required:
plexiglass plate 74x150x2mm
8x M3 melting thread
4x knurled screw M3x10mm or M3x10 screw for bridge and lid
4x M3x10 screw and m3 washer for seat
I used knurled screws for the bridge over the plexiglass and the roof for easier cleaning.
The feeding house is built quite solidly and all parts with 3 walls and 30% infill require around 700g of filament with the large seat
| Body-Eichhörnchen-Futterhaus.stl | 957.5KB | |
| Bridge-Eichhörnchen-Futterhaus.stl | 86.6KB | |
| Eichhörnchen-Futterhaus.f3d | 773.0KB | |
| Eichhörnchen-Futterhaus.step | 619.6KB | |
| Lid-Eichhörnchen-Futterhaus.stl | 133.7KB | |
| seat_big-Eichhörnchen-Futterhaus.stl | 222.3KB | |
| seat_smal-Eichhörnchen-Futterhaus.stl | 149.9KB |
