Life-sized Squid Game Dalgona, that you can actually play with.
The case is provided with the English and Korean logos and also the non-logo version.
Dalgona parts are designed to easily pull the shape out.
Case: 2 hr
Case Cover: 1.5 hr
Dalgona:1.5 hr
There are two types:
with layer
The dalgona files with the name end with _w_layer are easy to print. it has a thin first layer to stick the shape and the border.
without layer
The other dalgona files don't have the first layer intentionally. So, the parts may be separated when you removing your object from the bed.
It is recommended to use flow rate control to prevent this. It will be on your printer settings.
It's important to find your own value to fit your printer.
The gap between the shape and border is 0.1 mm, so you should increase your flow to make them stick together (like the star on the image). You can use flow_tester.stl to find this value (takes 5 minutes to print). 105% flow rate worked for me.
Thanks, and enjoy!
| dalgona_case.stl |
| dalgona_case_cover.stl |
| dalgona_case_eng.stl |
| dalgona_case_kor.stl |
| dalgona_circle.stl |
| dalgona_circle_w_layer.stl |
| dalgona_star.stl |
| dalgona_star_w_layer.stl |
| dalgona_triangle.stl |
| dalgona_triangle_w_layer.stl |
| dalgona_umbrella.stl |
| dalgona_umbrella_w_layer.stl |
| flow_tester.stl |
