This is a waterproof squeeze fan.
It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy.
You only need a hammer!
+Jul 06,2021
The turbine have been updated to have more power.
+Jul 11,2021
Added pin_tight in response to comments that pins are too loose.
The hole error of the base and cover has been adjusted.
+Jul 12,2021
Updated turbine and gear9(shaft) to better lock
+Jul 18,2021
Uploaded a thin turbine to easier to turn though the turbine has a similar force.
+Jul 18,2021
The turbine has been updated and parts have changed slightly.
Past versions have been removed.
This model accepts a 0.6mm diameter error.
Print out using 0.4 or 0.5mm nozzles.
PLA doesn't matter, but PETG is better (because it's quieter and more durable).
Inspired by Zippitybamba's fan design, I designed this fan: https://www.thingiverse.com/thing:3087416
Assembly video:
Fan demo!
| base.stl | 1.1MB | |
| cover.stl | 914.6KB | |
| crank.stl | 35.6KB | |
| gear_1020.stl | 402.0KB | |
| gear_20.stl | 350.7KB | |
| gear_920.stl | 262.3KB | |
| gear_9_v2.stl | 183.5KB | |
| handle.stl | 303.3KB | |
| pin_4x.stl | 63.9KB | |
| pin_tight.stl | 63.9KB | |
| turbine_v8.stl | 343.2KB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
