This is a 3D Printable remix of LeviBenAthan's design. I modified it into two individual footstools to allow for more users to 3D print it.
I recommend a relatively high infill for strength and rigidity.
You will need to print as follows
1x - SPFootPlateRIGHT
1x - SPFootPlateLEFT
4x - Leg
4x - Peg
The pegs are to add more rigidity to the legs.
The tolerances on this model are tight, you may have to use some force. Depending on the accuracy of your printer, you may even need to file some connections.
| HexPeg.stl | 1.3KB | |
| Leg.stl | 70.2KB | |
| SPFootPlateLEFT.stl | 23.5KB | |
| SPFootPlateRIGHT.stl | 23.5KB |
