I separated the Creality Sprite extruder shroud into two parts to make it easier to print. Once printed the blower cover is glued to the second part of the shroud.. This shroud / spacer lets you install the circuit board .I printed it in PETG because PLA gets brittle over time from moisture in the air. I printed it vertically using Tree Supports and a brim. that way unfinished parts are on the inside.
The picture with the supports stuck all over is why I redesigned it
The picture of the printer with the tree supports is how I printed the redesigned model and it worked out well.
| Sprite_Shroud-Fusion.stl | 802.2KB | |
| SPRITE_SHROUD_BLOWER_FACE-Cut001.stl | 204.5KB |
