Springfield Hellcat Optic Plate Adapter 3D Printer Model
The file 'Springfield Hellcat Optic Plate Adapter 3D Printer Model' is (stl) file type, size is 2.1MB.
The file 'Springfield Hellcat Optic Plate Adapter 3D Printer Model' is (stl) file type, size is 2.1MB.
This is an optic plate adapter for a Springfield Hellcat. It changes your optic footprint from Shield RMS to RMR. The edges were designed to fit flush with a Holosun 507C X2 but should fit any other RMR footprint optics.
I adjusted the red dot all the way up and got it to be sighted in at 7 yards but you may be able to get closer with another red dot. I plan on trying to make a shorter or angled mount to counteract this issue.
I racked the slide with the optic and even pretty violently with the edge of a table. It held up fine and still held zero after a couple hundred rounds.
You can use your screws from the optic plate cover to mount the adapter to the gun. You will then need 2 M3x10 bolts and nuts to mount the optic to the adapter.
Edit: Added 'Hellcat RMR Adapter V3' to give a 1 degree angle down to allow for sighting in at close ranges.
If you enjoy my work feel free to buy me a coffee. buymeacoffee.com/monotonesounds
| Hellcat_RMR_Adapter.stl | 2.6MB | |
| Hellcat_RMR_Adapter_V3.stl | 3.6MB |
