Spring-loaded Track Tensioner 3D Printer Model Free Download

File formats: stl

Download type: zip

Size:687.9KB

The file 'Spring-loaded Track Tensioner 3D Printer Model' is (stl) file type, size is 687.9KB.

Description Files (8)

Summary

Yamaha or Arctic Cat Spring Track Skid Parts

UPDATE :

Infos :

Springs are RC4WD internal springs. Z-S1183
- Dimensions: 5.5~6.5mm_diameter 35~40mm_length
The promod_rear_sprocket_bearing_v2.stl file is optional but recommended, else the tension will chew through the wheels very fast.
Bearings are flanged 3x10x4.
Make sure you file/sand the "pushrod" so it can slide freely in the rail's channels.
Don't overtighten the sprocket screws as it will lock up the tensioner.
Use 1 small washer on each side between the rails and sprockets for added slippyness.
Added bonus of having some flex when you jump and land on the tip of the skid!

Left_Skid_M8000.stl	604.8KB
promod_rear_sprocket_bearing_v2.stl	132.3KB
Promod_Rear_Sprocket_Pushtube_v4.stl	168.3KB
Promod_Skid_Left_v3.stl	555.6KB
Promod_Skid_Middle_v3.stl	43.8KB
Promod_Skid_Right_v3.stl	555.6KB
Right_Skid_M8000.stl	604.8KB
Spring_Holder_Left_v2.stl	158.9KB