Spray Can Pole Extension 3D Printer Model
The file 'Spray Can Pole Extension 3D Printer Model' is (stl) file type, size is 1.3 MB.
The file 'Spray Can Pole Extension 3D Printer Model' is (stl) file type, size is 1.3 MB.
Hi - this is a simple attachment to put a pressure pack spray can on the end of a pole. I use it to reach high into the branches of our fruit trees to zap the odd bug or two - you could also use it for spraying wasps or paint or pretty much anything you don't want to get close to.
The spray can fits into the rings, then attach a piece of light line to pull the trigger and spray away.
Originally I printed the socket piece with an ACME thread however the plastic split on the first test (if you look closely at the photo you'll see its held together with a cable tie). Eventually just went with a 1" un-threaded socket for an ordinary broomstick - simple and strong.
| Plate1.stl |
| Sprayer-1_-_Sprayer_-_Frame-1.STL |
| Sprayer-1_-_Sprayer_-_Ring-1.STL |
| Sprayer-1_-_Sprayer_-_Socket-1.STL |
| Sprayer-2.STL |
| Sprayer_-_Sprayer_-_Finger-1.STL |
| Sprayer_-_Sprayer_-_Trigger-1.STL |
