Spot Welding made from microwave transformer.
Required in addition:
Spot welding controller: https://bit.ly/3HG62lS
Spot pen: https://bit.ly/3WllIiw
Cable (25 mm2 or more) = 4 meters: https://bit.ly/3Ytg9As
(2 meter use for transformer winding, make 4 turns of the secondary winding, 2 meter for spot pen connection)
Connector DKJ 10-25 (or for the cable you choose): https://bit.ly/3hytMO4
Terminals SC25-6 fit for 25 mm2 (or for the cable you choose): https://bit.ly/3PzCMiv
Button KCD4-201 30 А/250: https://bit.ly/3V4AbhG
And bolts:
M3x5 = 2 pcs
M4x12 = 6 pcs
M5x12 = 2 pcs
PS: I have attached a sketch file so you can change the mounting holes of the microwave transformer. If you don't know how to do it, you can write to me ;)
| spot_welding.f3d | 1.3MB | |
| spot_welding_bottom.stl | 125.2KB | |
| spot_welding_cable_button_holder.stl | 19.2KB | |
| spot_welding_face.stl | 116.6KB | |
| spot_welding_heandle.stl | 38.6KB | |
| spot_welding_tpu_compressor.stl | 26.6KB | |
| spot_welding_transformator_9v_holder.stl | 12.2KB | |
| spto_welding_head.stl | 199.7KB |
