Hi!
This set of pieces are the 4th design of “Plastic Reef” series where i tried to recreate weird undersea creatures using procedural and generative algorithms implemented in Openscad.
The style and look of the “Spores” are inspired in Ernst Haeckel drawings. I’m fascinated with these kind of drawings and the organic structures that seems have been made by some sort of algorithm.
Not an easy print, some models require supports, good retraction settings and z-hop is recommended so take it as a challenge to improve your slice and printing skills.
If you have bed adhesion issues i recommend using a brim or move down a few millimeters the model to give a flat surface and a better stick to bed.
This has been made as a community project supported by Fillamentum and lots of passionate makers.
Thanks to all of them:
3DMN
FilaFlip3D
FilamentFrenzy
FutLab
Filip Žákovec
Lab.cafe
Leonardo Delgado
Open Innovations
Openfil
RavMeimad
Stereolab
Trilab
and
Laila
Have Fun!
| spores_sample.scad | 914.0B | |
| spore_1.stl | 17.2MB | |
| spore_10.stl | 6.6MB | |
| spore_11.stl | 9.4MB | |
| spore_12.stl | 11.4MB | |
| spore_13.stl | 6.3MB | |
| spore_14.stl | 20.9MB | |
| spore_15.stl | 6.2MB | |
| spore_16.stl | 8.0MB | |
| spore_17.stl | 5.2MB | |
| spore_18.stl | 6.5MB | |
| spore_19.stl | 7.1MB | |
| spore_2.stl | 6.5MB | |
| spore_20.stl | 10.8MB | |
| spore_21.stl | 14.5MB | |
| spore_22.stl | 5.4MB | |
| spore_23.stl | 8.4MB | |
| spore_24.stl | 5.4MB | |
| spore_25.stl | 8.9MB | |
| spore_26.stl | 12.0MB | |
| spore_27.stl | 12.2MB | |
| spore_28.stl | 15.7MB | |
| spore_29.stl | 13.6MB | |
| spore_3.stl | 8.9MB | |
| spore_30.stl | 5.7MB | |
| spore_4.stl | 4.3MB | |
| spore_5.stl | 4.0MB | |
| spore_6.stl | 8.3MB | |
| spore_7.stl | 4.8MB | |
| spore_8.stl | 12.0MB | |
| spore_9.stl | 11.8MB |
