The file 'Spool Storage | Turn Empty Filament Spools Into Storage | Upcycling Option For Empty Filament Spools | Minimal Filament And Assembly Required 3D Printer Model' is (stl) file type, size is 798.4KB.
Give your empty filament spools a second life with this simple print. Whether your a beginner, an enthusiast or expert printer this design requires minimal filament and almost no assembly.
This design was made using a 200mm diameter spool with about 60mm of width and a depth of approximately 55mm.
I tested this design out using PLA but other materials will likely work just as well.
As always, these designs are 100% free to use and any feedback would be greatly appreciated.
| SpoolStorage-Half-1x1x1x1.stl | 316.3KB | |
| spoolstorage-half-1x2x1.stl | 234.7KB | |
| SpoolStorage-Half-1x3.stl | 263.6KB | |
| SpoolStorage-Half-2x2.stl | 263.3KB | |
| SpoolStorage-Half-Plain.stl | 236.9KB | |
| SpoolStorage-Quarter-1x1.stl | 235.4KB | |
| SpoolStorage-Quarter-Plain.stl | 208.7KB | |
| spoolstorage-spacer.stl | 688.7KB |
