Don`t know what to make with your empty spools?
Expandable spool storage box.
Only threaded rods and nuts are required to connect the coils to each other.
These boxes are for spools with outerdiameter 195 mm and innerdiameter 68 mm.
The height of the boxes is 52 mm but this is not so important because you can change the height in your slicer (disable "uniform skaling")
00_template_spool_195x68.STL
This is a pattern for the holes needed in the spool to fix the boxes.
120° für the version with 3 boxes and 90° for the version with 4 boxes.
00_separation_wall_spool_195x68.STL
separation wall to device the boxes into two sections
01_storage_box_3_spool_195x68.STL
version with 3 storage boxes for one spool
02_storage_box_3_spool_195x68_NozzleBoxV1.STL
storage box for nozzle`s from 0.1 - 0.4 mm
space for 9 pieces of each variety
03_storage_box_3_spool_195x68_NozzleBoxV1.STL
storage box for nozzle`s from 0.1 - 1.0 mm
space for 4 pieces of each variety
04_storage_box_4_spool_195x68.STL
version with 4 storage boxes for one spool
UPDATE
Storage Box for Ampertec-Spools added
05_Ampertec_1kg_Storage_Box_3.STL
06_Ampertec_1kg_Storage_Box_4.STL
| 00_separation_wall_spool_195x68.STL | 684.0B | |
| 01_storage_box_3_spool_195x68.STL | 107.9KB | |
| 02_storage_box_3_spool_195x68_NozzleBoxV1.STL | 644.4KB | |
| 03_storage_box_3_spool_195x68_NozzleBoxV2.STL | 782.9KB | |
| 04_storage_box_4_spool_195x68.STL | 105.9KB | |
| 05_Ampertec_1kg_Storage_Box_3.STL | 111.3KB | |
| 06_Ampertec_1kg_Storage_Box_4.STL | 107.4KB | |
| 07_Ampertec_0.5kg_Storage_Box_3.stl | 111.6KB | |
| 08_Ampertec_0.5kg_Storage_Box_4.stl | 108.9KB | |
| 09_Ampertec_0.5kg_Nozzle_Box_3.stl | 701.6KB | |
| 10_Ampertec_0.5kg_Nozzle_Box_4.stl | 487.0KB | |
| 11_Schablone_Ampertec_0.5kg.stl | 249.9KB | |
| 12_Printed_Solid_Jesse_1kg_Storage_Box_3.STL | 757.8KB | |
| 13_Printed_Solid_Jesse_1kg_Storage_Box_4.STL | 711.0KB | |
| 14_Polyalchemy_0.75kg_Storage_Box_3.STL | 757.2KB | |
| 15_Polyalchemy_0.75kg_Storage_Box_4.STL | 710.2KB |
