This is a fixed top mounted spool holder.
Minimum spool internal diameter: 50 mm.
Maximum spool width: 105 mm.
Withstands loads of up to 2.5+ kg without deformation (tested).
Height from the end of the profile to the axis of symmetry of the shaft: 210 mm.
For installation, you will additionally need two M5 threads with a length of about 245 mm, two ordinary M5 nuts and two M5 nuts of your own aesthetic choice.
The threads are screwed into the profile and secured with ordinary nuts. Then all parts of the structure are installed in place and secured with the remaining two beautiful nuts.
| Higher_Pillar.stl | 23.7KB | |
| Lock_thickness_7.6_mm.stl | 27.4KB | |
| Lock_thickness_8.0_mm.stl | 28.0KB | |
| Lower_Pillar.stl | 63.2KB | |
| Shaft.stl | 87.8KB |
![Short Spool Adapter [ender 3 V2 Neo] 3D Printer Model](https://cdn.3axis.co/assets/20/1d/02/9d/201d029d-8d9a-4556-9485-608a848df14e/images/591664df-b438-487e-8f8d-0a2d9ea1ebf5_thumb.jpg)
