The file 'Split Tech Helmet 3D Printer Model' is (stl,obj) file type, size is 11.4MB.
Hello this is my first time splitting any kind of model, but I just tried to keep it simple and easy to print. I've heard that for this helmet you should up the size to 120%. for the detail pieces you'll want to scale them up to 120% to match the size of the helmet. Sorry if all that information wasted your time but I've never actually printed this out, so I don't know lol. Also some of the files are obj because i forgot to save them as stl files but it will all print the same and as far as i know if you just treat them like stl's then they will work. The original design for this helmet is by jace1969.
| medium_tech_stick_piece_just_mirror_it.stl | 215.7KB | |
| small_tech_stick_piece_x2.stl | 115.7KB | |
| tech_bottom_left_back.obj | 2.5MB | |
| tech_bottom_left_front.obj | 3.7MB | |
| tech_bottom_mouth_detail.stl | 78.2KB | |
| tech_bottom_right_back.obj | 2.5MB | |
| tech_bottom_right_front.obj | 3.8MB | |
| tech_mouth_detail_x2.stl | 315.7KB | |
| tech_side_chunk_xMirror.stl | 1.0MB | |
| tech_small_nub_thing_x2.stl | 89.7KB | |
| tech_top_left_back.obj | 6.1MB | |
| tech_top_left_front.obj | 4.7MB | |
| tech_top_mout_detail.stl | 86.3KB | |
| tech_top_right_back.obj | 6.1MB | |
| tech_top_right_front.obj | 4.8MB | |
| tech_visor.stl | 137.4KB |
