Fully printed split flap clock.
You'll need some M3x10mm bolts and lock nuts to hold everything together. 3 28BYJ steppers drive the displays, with ULN2003 drivers, all connected to an Arduino with an RTC module.
| 0.stl | 29.2KB | |
| 1.stl | 22.9KB | |
| 2.stl | 20.0KB | |
| 3.stl | 28.6KB | |
| 4.stl | 25.7KB | |
| 5.stl | 24.1KB | |
| 6.stl | 27.8KB | |
| 7.stl | 26.1KB | |
| 8.stl | 25.1KB | |
| 9.stl | 32.7KB | |
| cap_10.stl | 79.8KB | |
| cap_12.stl | 89.5KB | |
| electronics_mount.stl | 69.0KB | |
| face.stl | 72.2KB | |
| h1.stl | 24.3KB | |
| h10.stl | 30.7KB | |
| h11.stl | 25.1KB | |
| h12.stl | 22.9KB | |
| h2.stl | 20.0KB | |
| h3.stl | 28.6KB | |
| h4.stl | 25.7KB | |
| h5.stl | 24.1KB | |
| h6.stl | 27.8KB | |
| h7.stl | 26.1KB | |
| h8.stl | 25.1KB | |
| h9.stl | 32.7KB | |
| leftstand.stl | 26.7KB | |
| m0.stl | 26.3KB | |
| m1.stl | 22.9KB | |
| m2.stl | 20.0KB | |
| m3.stl | 28.6KB | |
| m4.stl | 25.7KB | |
| m5.stl | 24.1KB | |
| mount_left.stl | 53.7KB | |
| mount_right.stl | 53.7KB | |
| rightstand.stl | 26.7KB | |
| rotor_h.stl | 103.6KB | |
| rotor_m.stl | 103.6KB | |
| rotor_s.stl | 93.8KB |
