Splat Dualies (as Seen In Game!) 3D Printer Model
The file 'Splat Dualies (as Seen In Game!) 3D Printer Model' is (stl) file type, size is 16.5MB.
The file 'Splat Dualies (as Seen In Game!) 3D Printer Model' is (stl) file type, size is 16.5MB.
The splat dualies from Splatoon I made for a cosplay.
Made in Onshape by following the in-game model (plus a couple artistic choices: having the back nozzle part be hexagonal and adding a trigger guard so you can spin it in your hand).
Feel free to use as long as you give credit and such
For both dualies you'll need to print all parts twice (except the ones that have "mirrored" versions, for those print one normal and one mirror). Clearence might be a bit tight so feel free to scale them a bit for a better fit
ALSO you'll need a 4mm diameter tube for this. I made it with my spare bowden tube from my printer
Originally on thangs ( https://than.gs/m/1064638 )
| back_nozzle.stl | 651.6KB | |
| back_nut.stl | 84.6KB | |
| bottomtube.stl | 1.7MB | |
| bottom_nut.stl | 1.2MB | |
| fronttube.stl | 2.0MB | |
| front_nut.stl | 1.3MB | |
| grip.stl | 4.9MB | |
| grip_L.stl | 4.8MB | |
| grip_L_mirror.stl | 4.8MB | |
| grip_mirror.stl | 4.9MB | |
| grip_peg.stl | 2.2KB | |
| head-fronttube.stl | 120.8KB | |
| head_L.stl | 934.3KB | |
| head_L_mirrored.stl | 927.5KB | |
| head_peg.stl | 2.2KB | |
| head_R.stl | 934.5KB | |
| head_R_mirrored.stl | 929.3KB | |
| inner_nozzle.stl | 1009.8KB | |
| outer_nozzle.stl | 1.9MB | |
| tank.stl | 1.9MB | |
| trigger.stl | 68.1KB | |
| trigger_cap.stl | 686.9KB | |
| trigger_cap_mirror.stl | 687.8KB | |
| trigger_guard.stl | 127.3KB | |
| trigger_hinge.stl | 1.2MB | |
| trigger_hinge_mirror.stl | 1.2MB |
![Prime Rick Portal Gun [Rick And Morty] 3D Printer Model](https://cdn.3axis.co/assets/65/14/1b/37/65141b37-5d5c-488c-acf1-1e3c74ae2c38/images/c7ee4887-fc43-4352-914b-4ebde8967929_thumb.jpg)