Spiralize/Vase Mode Modular Drawers 3D Printer Model
The file 'Spiralize/Vase Mode Modular Drawers 3D Printer Model' is (stl) file type, size is 87.4KB.
The file 'Spiralize/Vase Mode Modular Drawers 3D Printer Model' is (stl) file type, size is 87.4KB.
I remixed these so I can print them in vase mode using a 1mm nozzle @ 0.8mm layer height as well as using a regular 0.4mm nozzle. The sleeve has also been resized to fit the length of the drawers properly. I've also made a larger version which is scaled to 130%.
I've added a back to the sleeve with a hex pattern to increase strength and stability while only using a small amount of material. The drawers won't ever slide out the back and the strength and rigidity increase is substantial.
If printing with a 1mm nozzle the sleeves will no longer be able to slot into each other(they work fine with a regular 0.4mm nozzle). I use a little glue to hold a bunch of these together. While not as convenient it does work fine and with the 1mm nozzle and vase mode I can print a sleeve and drawer in about 45 mins. If you need them to slot together, use a regular nozzle.
https://www.youtube.com/watch?v=O1DXVTyntgc
Files:
Tabbed_Drawer_Sleeve-RetromanIE-122mm.stl
70mm x 70mm x 122mm
Drawer-RetromanIE-v3.stl
127mm x 60mm x 60mm
Large_Tabbed_Drawer_Sleeve-RetromanIE.stl
91mm x 91mm x 158.6mm
Large_Drawer-RetromanIE-v3.stl
165.1mm x 78mm x 78mm
.
| Drawer-RetromanIE-v3.stl | 90.5KB | |
| Drawer_Sleeve_Hex-RetromanIE-122mm.stl | 151.9KB | |
| Large_Drawer-RetromanIE-v3.stl | 90.5KB | |
| Large_Drawer_Sleeve_Hex-RetromanIE.stl | 151.9KB |
