I designed and printed a lamp that's based on a ws2812b-LED strip. The LED strip is connected to an ESP8266 board running WLED and a 5 volt power supply.
The lamp consist of two parts: a cylinder on the inside that has a groove to hold the LED strip and a translucent cover that is put over the cylinder.
The groove of the spiral is 3mm deep and has a height of 12mm and will fit any LED strip that has a height of less than 12mm. The total length of the spiral is about 2 meter / 6.5 feet.
| Spiral_lamp_cover.stl | 1.3MB | |
| Spiral_lamp_structure.stl | 722.6KB |
