This is a planter pot I designed for a little design sprint exercise. No Supports should be needed. Materials needed are as follows:
4 Inch Pot:
8X 3inch by .25inch Wood Dowel
6 Inch Pot:
8X 4.5inch by .375inch Wood Dowel
8 Inch Pot
8X 6 inch by .5 inch Wood Dowel
I used white PETG Filament and finished the wood rods by lightly burning the surface, then sanding, then putting a matte lacquer on. (See shou-sugi-ban)
| 4_Inch_Shell.stl | 2.1MB | |
| 4_Inch_Sleeve.stl | 543.1KB | |
| 6_Inch_Shell.stl | 2.1MB | |
| 6_Inch_Sleeve.stl | 543.1KB | |
| 8_Inch_Shell.stl | 2.1MB | |
| 8_Inch_Sleeve.stl | 543.1KB |
