This is a lampshade designed for vase mode printing ("spiralize outer contour" in Cura).
Mount is 26 mm ID, 34 mm OD. (Could maybe be scaled in the slicer for different sized mounts)
Tested on Ender 3 Pro with fast printing (80+ mm/s) but small layer height (0.12 mm).
You can use a larger layer height to get a lacy effect as gaps are left in the steeper surfaces.
Print with brim to prevent falling over as it gets quite tall.
Designed in Fusion 360 with the Form mode.
| Lampshade_5.stl | 2.6MB |
