Spiral Lamp Remix (WS2812/WLED) 3D Printer Model Free Download

Description Files (7)

Summary

This is a remix, make sure to also grab the original thing files so you have everything you need to print!

Battery:

Turnigy 2000mAh 1S 1C Lipo
Dimensions: 49 x 34 x 10mm
https://hobbyking.com/de_de/turnigy-2000mah-1s-1c-lipoly-w-2-pin-jst-ph-connector.html?queryID=2d11c8f3bf9633383915289a495db192&objectID=60076&indexName=hbk_live_magento_de_de_products

https://www.amazon.de/gp/product/B08TQSC5G9/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
(this also fits by slighly pressing the protection board against the lipo cell)

ESP32:

ESP-32 Dev Kit C (The one without the antenna sticking out, also get the ones without pinheaders already soldered to it, they are a pain to remove without proper tools)
https://www.amazon.de/gp/product/B08BTQZ318/
(The ESP runs WLED, you can find instructions on how to flash and configure it on the WLED GitHub page)

Charging Board:

Ebay "10PCS Type-C USB 5V 1A 18650 TP4056 Lithium Battery Charging Board Charger"
https://www.ebay.de/itm/174287836659

2A StepUp converter:

Switches:

10mm toggle switch
https://www.amazon.de/gp/product/B081TYG39R/

LED Strip:

9mm width WS2812 LED strip
(10mm width also works but needs some careful trimming on the sides, best use some sharp scisors for this)
each lamp needs 19 LEDs (2x6 + 1x7 LEDs)

The Lightpipe is printed in clear resin, I suggest to cover the inside with black electrical tape to prevent stray light from the charging borad. Do not paint it back, this will stop it from working correctly.

Also needed:

Soldering iron + solder
Wire (red, black and green or any other 3 colors to keep track of the wiring)
Superglue
Hotglue

Nice to have:

Black Electrical Tape
Doublesided Tape
Enameled copper wire (~0,3mm width)

Funsion360 Projects included if you wish to modify (sorry for my kinda "non optimal" workflow there)

Lightpipe.stl	20.8KB
SpiralLampBase_ESP32+WLED+Battery+TypeC.f3d	27.5MB
SpiralLampBase_ESP32+WLED+Battery+TypeC.stl	1.4MB
SpiralLamp_9mmWS2812LedStripHolder.f3d	9.0MB
SpiralLamp_9mmWS2812LedStripHolder.stl	1.0MB
SpiralLamp_TopLedMount.f3d	113.9KB
SpiralLamp_TopLedMount.stl	27.3KB

Spiral Lamp Remix (WS2812/WLED) 3D Printer Model

Summary

Tags

You might also like