Spiral Fidget 3D Printer Model
The file 'Spiral Fidget 3D Printer Model' is (stl) file type, size is 13.2MB.
The file 'Spiral Fidget 3D Printer Model' is (stl) file type, size is 13.2MB.
Spiral Fidget
I like the look of the new spiral fidgets but it takes two hands to play with them. Sometimes you only have one hand. So I made one with the inside captured. Still gives the amazement of the center going through the outside part but doesn’t fall apart.
I made three sizes. If you try to scale them up or down I am not sure how well it will work because you will be changing the tolerances.
I like the large one the best because the weight makes it slide faster but the middle size seems a little more comfortable.
The large one is the first one I made and I forgot to chamfer the edge so it is a Little sharp but not cutting. I will try to get a new file done one of these days when I get time.
I printed with no supports of any kind but make sure you have a clean bed for good adhesion.
I used the Spiral Fidget Cutting Tool from
“mscalora” on Prusa Printables
It worked great. Check it out.
| fidget_spiral_1_60mm.stl | 11.3MB | |
| spiral_fidget_3_50mm_complete.stl | 11.4MB | |
| spiral_figet_2_40mm_complete.stl | 7.1MB |
