Spinny Cube 3D Printer Model
The file 'Spinny Cube 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'Spinny Cube 3D Printer Model' is (stl) file type, size is 1.6MB.
Update: Mistake on my part, Body_2 now includes the ring for mounting the bearing. Not exactly sure how the first .stl did not include that.
This Spinny Cube was inspired off from a design I saw on Reddit. That spinner was still in production and I wanted to have it in my hands now.
The Body: The current body I have made is designed to use 608 Bearings. For printing, I left this flat on its side and used 50 Degree supports. This will require some cleaning to make smooth
The Caps: These caps were printed on their flat faces. Both caps are important to print. Each cap has a slightly different alignment between the helix connector in the center and the nubs on the outside. The caps should be almost flush in the cube when in place. A vice or press may be needed to press these into place, I plan on making a flat-to-cube-sided adaptor to make this easier.
Expect to do some sanding on the rounded faces to obtain the smoothest spin.
| SpinnyCube_Body_2.stl | 2.1MB | |
| SpinnyCube_Cap1_1.stl | 832.4KB | |
| SpinnyCube_Cap2_1.stl | 859.7KB |
