This is an effort to improve Spinn by allowing to use taller cups and reducing some of the common maintenance steps.
I know that you can remove the drip tray to allow for larger cups, but then the cleaning process doesn't happen like it should.

Usage:

Because of the round areas, it needs supports (it should be fairly minimal).
The assembly should be pretty straight forward.

Push the bracket and funnel out of the way, then pull it back when done brewing.
For the drip tray, pull the lever for about 10 seconds to reset it when it says it's full, then push it back.
Or pull it all the way out to remove the tray.

The funnel will direct the water of the cleaning process that comes out of the coffee spout into the drip tray.
The drip tray will direct the water to wherever you want to.

Note: The end side of the hose must be lower than the drip tray (you might need to raise the machine).

Spinn-Drip-Tray

Parts:

• Tray
• Puller
• Puller-Attachment

Need:

• 1x Magnet (15mm X 3mm) (actual: 15mm D, 2.6mm H), to keep the tray in place
• 2x Magnets (2mm X 1mm) (actual: 2mm D, 1mm H), to keep the puller lever in place
• Super glue to keep the magnets in place
• UV Resin or something similar to seal the tray and prevent leaks
• 3/16" Airline Tubing for Aquariums (actual: 5.5mm OD, 3.6mm ID), the lenght would depend on the distance to your sink or wherever you want to relocate the discharge

Optional:

• Silicone brushes to spread the resin where you need to

Spinn-Spout-Bracket

Parts:

• Bracket
• HoseHolder
• Funnel

Need:

• 2x Magnets (15mm X 3mm) (actual: 15mm D, 2.6mm H)
• 17mm of 3/16" Airline Tubing for Aquariums (actual: 5.5mm OD, 3.6mm ID)

Optional:

• UV Resin or something similar to seal the funnel and prevent leaks
• Silicone brushes to spread the resin where you need to
• Super glue to keep the magnets in place

Links:

https://www.amazon.com/s?k=Magnet+2x1mm
https://www.amazon.com/s?k=Magnet+15x3mm
https://www.amazon.com/s?k=3%2F16in+Airline+Tubing+Aquarium
https://www.amazon.com/s?k=uv+resin+kit
https://www.amazon.com/s?k=silicone+brush+resin
https://www.amazon.com/s?k=loctite+super+glue+gel