Hello!
This wall diorama was designed for the Sam Raimi Spider-man action figure but should work with any figure with a 3mm foot peg diameter.
The first version used wood screws, but I removed them to make the diorama more visually appealing. You can add double sided tape on the back of the wall dio instead.
Wear effect was added by using a soldering iron and melting holes and gashes on the print. To paint the model, I first sprayed the print with Krylon matte finish sealer, then I used regular black and white acrylic paint from the dollar store. Give the print one final coat of the matte sealer before using.
Print the model with the peg pointing upward to avoid the need for supports.
| Brick_Wall_Dio.stl | 211.3KB |
