Summary
This is a 2-drawer spice rack that is stackable with adjacent units to form a full tower. I have printed two sets, so I have 4 drawers total. Each pair of drawers holds 12 spice jars.
The entire thing is assembled with M3 6-8 mm length screws (the entire thing can be assembled with a single length of screw). No tapping should be required, but depending on your filament you may want to pre-tap to reduce the chance of cracking.
All pieces are labeled with the required print quantity to make one spice rack. 2x_(etc) means that the file must be printed twice to yield a full spice rack.
V2 Spice Rack
The V2 design contains several improvements over the V1. Notably:
A full 2-drawer set now takes about 0.65 kg to print
ZIP contents are as follows:
| Folder | Description |
|---|---|
| cura_3mf | .3mf files from my Cura including layout and print settings for Ender 3 Pro with Hatchbox PLA |
| creo_asm_v2 | Creo Elements assembly .prt files and .asm file |
| stl | STL files |
| STEP_AP214 | Spice rack part files in STEP format (AP214 formatted) output for CAD interchangeability |
| solidworks_export | Export in solidworks part format - I don't have solidworks so no guarantees |
| nx_export | Export in Siemens NX .prt format |
V1 Spice Rack
The V1 design was my first attempt at this, I am including the files in case they are useful. Please don't print from this ZIP file.
| 2x-back_holder_spice_rack_v2.stl | 1.4MB | |
| 2x-front_holder_spice_rack_v2.stl | 982.7KB | |
| 2x-lt_side_rail_spice_rack_v2.stl | 309.7KB | |
| 2x-rt_side_rail_spice_rack_v2.stl | 361.6KB | |
| 2x-top_bottom_spice_rack_v2.stl | 135.8KB | |
| lt_slide_rack_spice_rack_v2.stl | 1.2MB | |
| rt_slide_rack_spice_rack_v2.stl | 390.4KB | |
| v1.zip | 9.0MB | |
| v2.zip | 8.8MB |
