Spice Rack Pullout Design Update 3D Printer Model
The file 'Spice Rack Pullout Design Update 3D Printer Model' is (stl) file type, size is 682.7KB.
The file 'Spice Rack Pullout Design Update 3D Printer Model' is (stl) file type, size is 682.7KB.
Design Update
Since I've been 3D printing for over five years, there are quite a large number of 3D printed items in my house. Although my wife likes the functionality of the original design, seeing something with a little less plastic makes her a lot happier ;-)
I designed this pullout spice rack to allow for one, two, or three pull out shelves for spices. The rack pulls out and rotates 90 degrees in either direction just like the original design. There are two shelves on the rack which allow for the short spice containers on the top and larger round or square bottles on the bottom.
You can modify the lengths of the stainless steel rods for your needs, but I used:
Hardware parts
If you can't find or don't wish to use binding post and washers, then commputethis designed a printable connector you can print as a replacement https://www.thingiverse.com/thing:5907479
| spice-cab-rod-bot.stl | 892.2KB | |
| spice-cab-rod-mid.stl | 857.4KB | |
| spice-cab-rod-rail.stl | 60.9KB | |
| spice-cab-rod-top.stl | 228.5KB | |
| spice-cab-rod-trackendX1.stl | 33.8KB | |
| spice-cab-rod-trackendX2.stl | 59.0KB | |
| spice-cab-rod-trackendX3.stl | 87.2KB | |
| spice-cab-rod-trackX1.stl | 86.9KB | |
| spice-cab-rod-trackX2.stl | 168.9KB | |
| spice-cab-rod-trackX3.stl | 252.7KB |
