Spice Rack For 120ml Jars 3D Printer Model
The file 'Spice Rack For 120ml Jars 3D Printer Model' is (STL) file type, size is 205.6KB.
The file 'Spice Rack For 120ml Jars 3D Printer Model' is (STL) file type, size is 205.6KB.
This spice rack was designed to hold 120ml jars that are roughly 4.7cm square. The jars are readily available on Amazon, such as these:
https://www.amazon.co.uk/dp/B0CNQ24G9V?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
This rack keeps the jars out in the open and usable but elevated so they don't take up a lot of the workspace. It is divided into 9 pieces, and I just used a silicone adhesive to bond them together and then a bead of silicone (and a couple of dabs on the wall) to hold it in place.
The jars sit at 45 degrees so they are easy to pull out and easy to read the labeling on the lids.
I made mine to hold 32 jars, but you could make it as long as you like by adding more of the middle sections. Each additional middle section would add 8 jars.
There is a cutout to account for an upstand approximately 100mmx20mm
| Body1.STL | 54.2KB | |
| Body2.STL | 43.6KB | |
| Body3.STL | 83.6KB | |
| Body4.STL | 67.8KB | |
| Body5.STL | 13.0KB | |
| Body6.STL | 18.1KB | |
| Body7.STL | 67.8KB | |
| Body8.STL | 83.6KB | |
| Body9.STL | 18.1KB | |
| Spice_rack_whole.STL | 448.9KB |
