Spice Rack 3D Printer Model
The file 'Spice Rack 3D Printer Model' is (stl) file type, size is 115.2KB.
The file 'Spice Rack 3D Printer Model' is (stl) file type, size is 115.2KB.
I designed “Spice rack”. The base of rack is 60x200 mm and the height is 150 mm. The rail for spice rack has base 63x260 mm. The rack is pull out and can be rotated 90 °, so there is easy access to the spices. The base is attached to the bottom shelf with six 3,5x16 mm wood screws. The bracket for lower rack must be glued and screwed on the lower rack. The lower and upper rack and cover are only assembled together.
| Back_rail_-_III_tracks.stl | 49.8KB | |
| Back_rail_-_II_tracks.stl | 36.0KB | |
| Back_rail_-_I_track.stl | 22.2KB | |
| Bracket_for_lower_rack.stl | 17.2KB | |
| Front_rail_-_III_tracks.stl | 93.1KB | |
| Front_rail_-_II_tracks.stl | 68.4KB | |
| Front_rail_-_I_track.stl | 43.7KB | |
| Lower_rack.stl | 106.7KB | |
| Top_cover.stl | 22.2KB | |
| Upper_rack.stl | 112.8KB |
![Sploot Figurine [REMAKE] 3D Printer Model](https://cdn.3axis.co/assets/c9/81/f4/9b/c981f49b-e1a1-4414-b705-1048c9897797/images/07aad93e-0556-484a-b10d-d4a3a71a3efc_thumb.jpg)
