Spewpa – Pokemon 3D Printer Model
The file 'Spewpa – Pokemon 3D Printer Model' is (STL) file type, size is 88.0KB.
The file 'Spewpa – Pokemon 3D Printer Model' is (STL) file type, size is 88.0KB.
I found the .obj files here:
http://www.models-resource.com/3ds/pokemonxy/model/10675/
I modified the parts to print easier. My prototype did not have the fill in the model provided, so it's got some ugly hollow spots. It still turned out ok.
20% Infill, 0.1mm layers, about 3 hours print time.
About 6 hours painting.
| SPEWPA_ASSEMBLED.STL | 227.9KB |
