Spektrum NX10 Crossfire And Battery Extender 3D Printer Model
The file 'Spektrum NX10 Crossfire And Battery Extender 3D Printer Model' is (stl) file type, size is 82.7KB.
The file 'Spektrum NX10 Crossfire And Battery Extender 3D Printer Model' is (stl) file type, size is 82.7KB.
Who doesn't need a 1s 5p 17'500mAh Battery upgrade for his Spektrum NX10 ;D (may fit other NX radios also)
I printed it with PLA and support, cover needs to be fairly strong to hold up to the forces.
The holding clip needs to get superglued to the cover. To put the cover on your TX you need to gentle push down in the center.
The cover is made to fit with the big Crossfire module (mounted with double sided tape) as well as the small Crossfire Antenna with SMA.
LiIon Cells used, Molicel 18650 3500mAh 10A discharge, spotwelded together.
I would recomend to implement a XT-60/30 to charge it with an external charger, the internal works just fine, but takes many hours.
DON'T do this if you don't know what your are doing!
| Cell_Holder.stl | 14.9KB | |
| CRSF_and_Battery_Cover.stl | 205.5KB | |
| Holding_Clip.stl | 1.1KB |
