SpeedyBee Mario 5 Body + Tpu Parts + Gps Mount 3D Printer Model Free Download

Description Files (8)

Summary

SpeedyBee Mario

Body
GPS Mount
Foots

This model is designed specifically for the SpeedyBee Mario 5'' frame to securely mount the HGLRC M100 5883 GPS module (large version, 21x21mm).

The updated version features a streamlined, full-body design to improve aerodynamic stability, reduce wind resistance, and minimize turbulence. The enclosure also provides added protection for sensitive electronics, shielding them from physical damage, humidity, and debris. Key access points, such as the USB ports (right side) and SD card slot (left side), remain exposed for convenient use. The GPS module is tilted at approximately 25° to optimize reception during cruise.

Printing Instructions

Back Section (GPS module and antenna):

Material: TPU
Infill: 100%
Supports: Use supports with 5% infill, enable the option to create the support for all those things that are touching the build plate ("touching build plate" option in my creality s1). This setup will simplify the support removal.
Orientation: Print vertically with the antenna connector pointing upwards for best results.

Body Section:

Material: PLA or PET
Infill: 100%
Adhesion: Use a brim for better adhesion to the build plate.
Orientation: Print vertically with the base touching the bottom of the build plate

mario2_v10-back.stl	278.8KB
mario2_v10-PT1.stl	223.6KB
mario2_v10-PT2.stl	167.0KB
mario2_v10-PT3.stl	223.6KB
mario2_v10-PT4.stl	191.4KB
mario2_v15-PT3-alt-usb.stl	148.4KB
mario2_v15-PT4-alt.stl	125.1KB
mariofoot.stl	145.1KB