SpeedyBee F405 Wing Mini 3D Printer Model
The file 'SpeedyBee F405 Wing Mini 3D Printer Model' is (stl) file type, size is 321.4KB.
The file 'SpeedyBee F405 Wing Mini 3D Printer Model' is (stl) file type, size is 321.4KB.
This is remix for the SpeedyBee F405 Wing Mini, remixed from the 2 part mount from jh1972 Thing Number 6208001 which is for the full size FC
The FC mounts in the base and the connection board fits to the top mount.
I have included 2 different top mounts the standard one covers the ESC pads on the top but allows better access to the header pin holes.
The V2.0 version moves the top plate back to clear the ESC pads and also adds blocks to stabilise the connection board because the bottom is not flat like the full size one. The FC is so small its impossible to have both ESC Pads and Header Pin holes uncovered together!
You will need to drill the holes out by 1/2 a mm or so and use an M3 screw to tap the threads.
| SpeedyBee_F405_Wing_Mini_Mount_Base.stl | 249.8KB | |
| SpeedyBee_F405_Wing_Mini_Mount_Top_Plate.stl | 297.8KB | |
| SpeedyBee_F405_Wing_Mini_Mount_Top_Plate_V2.0.stl | 298.5KB |
