Speediance Ring Adapter 3D Printer Model
The file 'Speediance Ring Adapter 3D Printer Model' is (stl) file type, size is 3.4KB.
The file 'Speediance Ring Adapter 3D Printer Model' is (stl) file type, size is 3.4KB.
I personally don't like having to wear the ring on any of my fingers or even my thumb as that just is not working out for me. I really like the idea of the controller to be on the bar or the hand grips and so I tried to mount it as is but that also gave me an uncomfortable way of getting to the button. I decided that if it were mounted 90 degrees to the bar/handle it would be the easiest for me to use and that's when I came up with this.
I printed this in TPU so that it would be grippy, with a .6mm nozzle and a .5mm layer height, so this is as rough as it gets and it came out pretty good (it should print even better using a .4 nozzle and a .2mm layer height). I designed it to be printed upside down and not need support but I did print it with tree supports for just the outer part where the velcro goes through. I have not tested it without any supports but I prefer to design things so that they don't need support. I also made it so that the velcro that comes with the ring can be reused as the only additional part and not need anything else.
| bluetoothRingAdapter.stl | 18.1KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
