Speed Racer Cat Helmet – PUSS RACER!! 3D Printer Model
The file 'Speed Racer Cat Helmet – PUSS RACER!! 3D Printer Model' is (stl) file type, size is 762.8KB.
The file 'Speed Racer Cat Helmet – PUSS RACER!! 3D Printer Model' is (stl) file type, size is 762.8KB.
Does your puss drive a Mk5? Is it hell bent on competing against Captain Terror??? If so.... This is the puss helmet for you!!!!
Look at the focus on my pusses face!!! He is ready to race... and WIN!!!
Finally we have the technology to provide your Puss Racers with the safety gear they require.
Designed to easily fit on a 230 x 230 bed, this helmet comes as a single STL file that includes all of the custom supports and bed art to make this print as enjoyable as possible.
Print this bad boy at 0.2mm layer height with a line thickness of 0.4 (for a 0.4mm nozzle) and you should be good to go. I usually set it to 60mm/s however this is up to you.
Snap the helmet off the supports and touch it up with a bit of 800 Grit sandpaper.
The whole project should only consume about 60 grams of filament if you print it at the original size. Its been designed for a full sized puss. My little fella will have to grow into it.
SHABOOMBOOM!!! You have a puss racer in the house!
| Puss_Racer_Helmet.stl | 2.5MB |
