Speakeasy Arms Pipe Cleaning Ash Tray Pack 3D Printer Model
The file 'Speakeasy Arms Pipe Cleaning Ash Tray Pack 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'Speakeasy Arms Pipe Cleaning Ash Tray Pack 3D Printer Model' is (stl) file type, size is 2.2MB.
This is a Pipe Cleaning ashtray pack, designed to allow you to flip your pipe over and easily clean out the bowl into the Ash tray.
Currently there are 2 different styles, but 4 different designs.
2 Pumpkin Hex designs, One with a full spike and one with a hole for a nail
2 AR15 Bolt Face designs, one with a full spike and one with a hole for a nail
For the Nail versions, use a small nail and cut it to a length that works. you can also use a finish nail that fits in the hole.
You can use a slightly larger nail with the head cut off and heat it then press it in, or use one that fits snug or slightly smaller with a drop of superglue.
Print no supports for best results. Even a moderately well tuned printer will print this with no supports. Do not use bed adhesion (Brim/Raft) if you can avoid it. If you have to you can but I recommend trying not to.
| Speakeasy_Arms_AR15_Bolt_Face_Ash_Tray_Hole_v1.1.stl | 1.5MB | |
| Speakeasy_Arms_AR15_Bolt_Face_Ash_Tray_v1.0.stl | 1.5MB | |
| Speakeasy_Arms_Pipe_cleaning_Ashtray_Hole_v1.1.stl | 1.4MB | |
| Speakeasy_Arms_Pipe_cleaning_Ashtray_v1.0.stl | 1.5MB |
