Spatula And Pliers Holder To Screw To PSU (Ender 3, CR10 And Others) 3D Printer Model
The file 'Spatula And Pliers Holder To Screw To PSU (Ender 3, CR10 And Others) 3D Printer Model' is (stl) file type, size is 64.05 KB.
The file 'Spatula And Pliers Holder To Screw To PSU (Ender 3, CR10 And Others) 3D Printer Model' is (stl) file type, size is 64.05 KB.
I wanted a tool holder for spatula and pliers of my Ender 3 on the backside of the PSU. There are two holes for M4 screws. Astonishingly I found no part for this location on Thingiverse. So I made one on my own. Maybe it's useful for someone else.
The PSU may not be the same on all Enders. That's why I'm not sure if this fits on all Enders. I added a photo showing the location of the screw holes on my PSU. Check if this will fit for you before printing.
I took M4x8 screws because I didn't have shorter ones but M4x6 would be enough.
Even though I made this for my Creality Ender 3 this may fit for other printers. The slot is for 38mm spatulas and the pocket for the pliers is 41mm x 13mm.
Edit 2020-05-31:
After one year of usage suddenly the lower part broke off the upper part with the screws. I glued it together which is ok. But I also made the back of the part slightly thicker and uploaded this as V03.
| Ender_3_Spatula_and_Pliers_Holder_to_screw_to_PSU_-_V02.stl |
| Ender_3_Spatula_and_Pliers_Holder_to_screw_to_PSU_-_V03.stl |
