This was a fun little project of mine after getting inspiration from others on Etsy and Amazon.
I wanted to get more experience in Fusion360 and 3D printing at the same time.
This comes in several parts, all link to each other.
The head links with the pin to the backplate
The Legs (you need to clone) link to the body
And the Eyes (print in White) connect to the head
The fun part about this is that if you print the eyes in white you get to draw your own style and look, crazy or sane.
n,b this is intended for a spare toilet paper (loo roll) holder, its not intended for every day use!
[editors notes] Whilst this works with my toilet rolls of choice this might not work with yours; please check your measurements before printing. You might need to scale it accordingly. the current design was intended to fit an inner tube of 43-45mm with some tolerances. I will see if I can work a mechanical design to fit different sizes.
Happy printing
[edit 2024-08-28]
I have created a backplate v2, this is indented to print flat at 0.16 and didn't need any >supports on my KE, it was a good fit for the pin and seemed to be flexible with the tube I >have here. Because of the thin layer it should be flexible to fit in smaller tubes.
| backplate.stl | 287.4KB | |
| backplate_v2.stl | 49.3KB | |
| body.stl | 771.8KB | |
| eyes.stl | 249.3KB | |
| head.stl | 1.6MB | |
| legs.stl | 1.1MB | |
| pin.stl | 63.5KB | |
| Toilet_Roll_holder.3mf | 1.3MB |
