SpaceX Starship Flyable Model 3D Printer Model
The file 'SpaceX Starship Flyable Model 3D Printer Model' is (stl) file type, size is 6.5MB.
The file 'SpaceX Starship Flyable Model 3D Printer Model' is (stl) file type, size is 6.5MB.
Model rocket version of the SpaceX Starship 24 and Booster 7 by AstroNot.
The rocket will fly with a 18mm Estes C or D engines. A parachute needs to be used for recovery.
Print everything at 100% scale, except for the flaps, they need to be printed at 120%.
Materials needed for assembly and flight:
Note that I recommend to simulate your own printed rocket in the "openrocket" software before launching.
My model has been launched for several times and each time it was modified to get to the final "flying" result. However some "old" parts remain on my build and thus the complete updated rocket was never launched.
If you have never launched a cluster type rocket before, please do your research first.
| 4x18mm_motor_mount.stl | 211.8KB | |
| AFT_Left_Flap.stl | 305.7KB | |
| AFT_Right_Flap.stl | 305.7KB | |
| airbrake_connector.stl | 34.5KB | |
| Booster_-_Big_fin.stl | 6.4KB | |
| Booster_-_Box.stl | 26.0KB | |
| Booster_-_Small_fin.stl | 6.0KB | |
| Booster_-_Stabilizer.stl | 884.0B | |
| Bottom_baffle_-_75mm_coupler.stl | 63.6KB | |
| FWD_Left_Flap.stl | 246.3KB | |
| FWD_Right_Flap.stl | 246.3KB | |
| Grid_Fin.stl | 71.8KB | |
| HotBox_-_75.stl | 25.1KB | |
| Parachute_connector.stl | 40.5KB | |
| Rail_glider.stl | 147.0KB | |
| raptors_-_55mm_engine_house.stl | 1.9MB | |
| Shock_cord_connector.stl | 4.2KB | |
| Starship_-_Aft.stl | 324.9KB | |
| Starship_-_Mid.stl | 671.6KB | |
| Starship_-_Nose.stl | 17.0MB | |
| Top_baffle_-_75mm_coupler.stl | 63.6KB |
