SpaceX Falcon Heavy Expansion Kit For Falcon 9 Model 3D Printer Model
The file 'SpaceX Falcon Heavy Expansion Kit For Falcon 9 Model 3D Printer Model' is (stl) file type, size is 3.4MB.
The file 'SpaceX Falcon Heavy Expansion Kit For Falcon 9 Model 3D Printer Model' is (stl) file type, size is 3.4MB.
This is an expansion kit for my SpaceX Falcon 9 Model found here: https://www.thingiverse.com/thing:2457148
****Model Update: A new .stl file has been added that includes the beams that connect the boosters to the Falcon Heavy core stage. Print two of the "booster-core connector" files and use them as the top booster connections. Print two of the "booster connectors" for the bottom connections.
****Many of you asked, so here it is, the Strongback is now available here! https://www.thingiverse.com/thing:2779030
This kit allows you to build a Falcon Heavy as well as attach a Crew Dragon capsule (Dragon V2) to your model.
Instructions:
Print a complete Falcon 9 model from the link above as well as two additional first stages (pieces 1-4, landing legs, and grid fins.
Print 4 of the booster connectors and insert them into the 4 large holes in one of the Falcon 9 first stages. Connect the two addition first stages using the corresponding holes.
Print 2 booster nose cones and connect these to the top of the two boosters. These use the same rotate-to-lock connectors as the interstage on the original model.
| Booster-Core_Connector.stl | 190.9KB | |
| Booster_Connector.stl | 71.0KB | |
| Crew_Dragon.stl | 3.5MB | |
| Crew_Dragon_Trunk.stl | 1.0MB | |
| Falcon_Heavy_Booster_Nose_Cone.stl | 3.3MB | |
| Nose_Cone_Crew_Dragon.stl | 2.1MB |
