Behold, the coolest currently flying rockets out there! This design includes all the parts to make either a fully stacked Falcon 9, a landed Falcon 9 booster, and a fully stacked Falcon Heavy! A text file is included that says what parts you need to print for each version.
These are 1:100 scale.
I will update this post with stands for both rockets, not sure how long that will be. Feel free to design one yourself, I'd love to see them!
I ran all of the parts through Cura, and they should print fine with supports. Print all of the engines with the nozzle pointed skyward. The booster engines don't need support, but the 2nd stage engine does. Print the grid fins on the flat end. The grid fins do not need support, but I recommend a brim. Most parts will need support, but play around with them to minimize it.
If you print these, post a make! I'd absolutely LOVE to see them. I'd also appreciate any suggestions on what tweaks to make in order to make the model an easier print. Enjoy!
| 2nd_Stage.stl | 1.4MB | |
| 2nd_Stage_Engine.stl | 2.4MB | |
| Booster_BOTTOM.stl | 954.8KB | |
| Booster_Engine.stl | 2.6MB | |
| Booster_TOP.stl | 1.8MB | |
| F9_Interstage.stl | 2.5MB | |
| F9_Octaweb_CLOSED.stl | 6.6MB | |
| F9_Octaweb_OPEN.stl | 6.5MB | |
| Fairing.stl | 2.0MB | |
| FH_Bottom_Strut.stl | 57.2KB | |
| FH_Center_Core_Octaweb.stl | 6.7MB | |
| FH_Interstage.stl | 11.4MB | |
| FH_Side_Booster_Octaweb.stl | 6.6MB | |
| Grid_Fin.stl | 723.0KB | |
| Interstage_Stabilizer.stl | 1.6MB | |
| Parts_List_READ_THIS.txt | 1.4KB |
![[OLD] SpaceX Starship SN8 3D Printer Model](https://res.3axis.co/c4921ac3-dfd7-416a-b797-7d78bb33e92d/images/028ce9fc-c920-48d3-b1b1-5feba85a4439_thumb.jpg)