Spaceonefpv 220X Pod 3D Printer Model
The file 'Spaceonefpv 220X Pod 3D Printer Model' is (stl) file type, size is 7.1 MB.
The file 'Spaceonefpv 220X Pod 3D Printer Model' is (stl) file type, size is 7.1 MB.
****Update. New Models added.
Short Camera= flight camera position to outside of pod is shorter.
Gopro Normal Camera=Original flight camera position with gopro mount
Gopro Short Camera=flight camera position to outside of pod is shorter with gopro mount.
This is an aero pod for the Spaceonefpv220x frame. It replaces the stock upper frame deck and standoffs. It is modeled for use with the hs1177 camera. With 30,40, and 50 degree camera positions. Pod is Intended for use with 2.1 camera lens. It uses 4x1/2" pan head sheet metal screws you can find at your local home store i.e. Lowes ,Home depot etc. to attach to the stock frame.
| battery_tray.STL |
| Gopro_Normal_Camera.STL |
| Gopro_Short_Camera.STL |
| Short_Camera.STL |
| Single_camera_hole50DEG.STL |
| Spaceonefpv220xPOD.STL |
