Sovol SV08 Spoolholder 3D Printer Model
The file 'Sovol SV08 Spoolholder 3D Printer Model' is (f3d,stl) file type, size is 642.6KB.
The file 'Sovol SV08 Spoolholder 3D Printer Model' is (f3d,stl) file type, size is 642.6KB.
My SV08 did not fit on the workbench. The filament holder extends to the right, where my filament shelf is.
So I made this filament spool holder replacement with fusion.
Works well, looks good, mission accomplished.
What you need in addition:
Two Screws M4x20, because the original screws are too short
One M3 melt-in thread
Supports are necessary, just for the two notches for the barrel roll. Do not print supports inside the screw holes. You need a support blocker there.
Wall count should be increased. 5 or 6 walls would be great.
I'd recommend infill >20%.
If you want to resize it for your special needs, just use the Fusion360 file and edit some values.
Update 1/2025:
I used the usual top extension for the housing. So I needed to redesign the spool holder. Looks better now, uses less material and print time. Use the files ending with "_high" for this.
| SV08_Spoolholder.f3d | 237.5KB | |
| SV08_Spoolholder.stl | 395.6KB | |
| SV08_Spoolholder_High.f3d | 230.9KB | |
| SV08_Spoolholder_High.stl | 197.7KB |
