Sovol SV08 Fully closed Raiser.

This is a remix of the open style Raiser of Gergo:
https://drive.google.com/drive/folders/1fJzGwCswiRXadmaaq2O9OR1fVISvKaK1

@Gergo: if this remix infringes a copyright of yours, please let me now and I will remove this remix.

Changes compared to the original design:

• fully closed
• magnet holes at the top to securely fix the top panel
• opening filler piece that fills the gap around the spoolholder

Required 3D printed parts:

• Raiser_LeftBack.stl (1x)
• Raiser_LeftFront.stl (1x)
• Raiser_RightBack.stl (1x)
• Raiser_RightFront.stl (1x)
• OpeningFiller.STL (1x)

Required other parts:

• m3x10 screw (12x)
• m3 washer 8.8x0.8 (12x)

Optional other parts:

• magnets 8x3 (28x)
• metal round plate 10x0.4 (28x)
• top plate 520x530x5

Recommended materials:

• Raiser_LeftBack.stl (ABS, 10% infill, support touching bed)
• Raiser_LeftFront.stl (ABS, 10% infill, support touching bed)
• Raiser_RightBack.stl (ABS, 10% infill, support touching bed)
• Raiser_RightFront.stl (ABS, 10% infill, support touching bed)
• OpeningFiller.STL (ninjaflex, 15% infill, support touching bed)

Remarks:

• I did print the raiser in PETG, if needed I will reprint in ABS
• I use cheap wood as top plate
• the double sided tape on the metal round plates was not strong enough by itself top stick to the topplate. This has been fixed by adding a drop of superglue to the metal round plates

magnets:
https://nl.aliexpress.com/item/1005002209176808.html?spm=a2g0o.order_list.order_list_main.4.114479d2jAXhzA&gatewayAdapt=glo2nld

metal plates:
https://nl.aliexpress.com/item/1005005940011763.html?spm=a2g0o.order_list.order_list_main.56.790979d2yv9Nz2&gatewayAdapt=glo2nld